Services & CapabilitiesMetal Stamping ServicesFour Slide Stamping ServicesPast ProjectsStamping of a Stainless Steel Flapper ValveFour Slide Wire Forming of Hard Drawn Wire RingMetal Stamped Steel Valve PlateFour Slide Stamping of a Brass Brush HolderFourslide Forming of a Steel Compression LimiterStamped Steel Bar Adjusting PinMetal Stamping of a Cord Terminal Assembly

Metal Stamped Steel Valve Plate for the Compressor Industry

At Excel Spring & Stamping, we have been providing high quality precision metal stamping services to our customers for over 50 years. This valve plate was manufactured for our customer in Tennessee. The valve plates are stamped from .105" thick C1008/1010 cold rolled steel with a soft temper using our 150 ton punch press. The plates feature dimensions of 3.00" in length, 2.760" in width, and .190" in height, and are manufactured to dimensional tolerances of ±.002" and 1°. We produced this part as a stamping, in place of the customer's old, more costly production method. The stamped part performed better, in addition to saving the customer over 50% in cost.

After stamping, the plates were de-burred and inspected both visually and through dimensional inspection to ensure all customer specifications were met. We have produced over 4,200,000 of these valve plates to date, but are capable of both short and long production runs. This steel valve plate demonstrates our ability to produce larger metal stampings, in addition to our expertise in smaller stampings, fourslide stampings, and custom wire forms. It is also an example of using embossments to ensure correct component position during assembly. For more information about this precision metal stamping project, see the table below, or contact us directly.

  Steel Valve Plate
[click to enlarge]
Steel Valve Plate
Request A Quote

Metal Stamped Project Highlights

Product Name Valve Plate
Product Description This stamped component is a plate for a valve assembly.
Capabilities Applied/Processes Primary:
Stamping
Secondary:
Deburring
Equipment Used to Manufacture Part 150 Ton Punch Press
Overall Part Dimensions Length: 3.00"
Width: 2.760" ± 0.015
Height: 0.190"
Tightest Tolerances ± 0.002
Angular: ± 1°
Material Used C1008/1010 Cold Rolled Steel Soft Temper
Thickness: 0.105"
Material Finish Raw
In process testing/inspection performed Dimensional Inspection, Visual Inspection
Industry for Use Air Compressor
Volume Over 4,200,000 to date
Delivery Location Tennessee
Standards Met Customer Specifications, 2D CAD Drawing
View Other Past Projectsback to top
Printable PagePrintable Page Email This PageEmail This Page
Copyright © 2013 Excel Spring & Stamping, Inc., All Rights Reserved Site created by Thomas Web Solutions